\(p\)-adic Capped Relative Elements#

Elements of \(p\)-adic Rings with Capped Relative Precision

AUTHORS:

  • David Roe: initial version, rewriting to use templates (2012-3-1)

  • Genya Zaytman: documentation

  • David Harvey: doctests

class sage.rings.padics.padic_capped_relative_element.CRElement#

Bases: pAdicTemplateElement

add_bigoh(absprec)#

Return a new element with absolute precision decreased to absprec.

INPUT:

  • absprec – an integer or infinity

OUTPUT:

an equal element with precision set to the minimum of self’s precision and absprec

EXAMPLES:

sage: R = Zp(7,4,'capped-rel','series'); a = R(8); a.add_bigoh(1)
1 + O(7)
sage: b = R(0); b.add_bigoh(3)
O(7^3)
sage: R = Qp(7,4); a = R(8); a.add_bigoh(1)
1 + O(7)
sage: b = R(0); b.add_bigoh(3)
O(7^3)

The precision never increases:

sage: R(4).add_bigoh(2).add_bigoh(4)
4 + O(7^2)

Another example that illustrates that the precision does not increase:

sage: k = Qp(3,5)
sage: a = k(1234123412/3^70); a
2*3^-70 + 3^-69 + 3^-68 + 3^-67 + O(3^-65)
sage: a.add_bigoh(2)
2*3^-70 + 3^-69 + 3^-68 + 3^-67 + O(3^-65)

sage: k = Qp(5,10)
sage: a = k(1/5^3 + 5^2); a
5^-3 + 5^2 + O(5^7)
sage: a.add_bigoh(2)
5^-3 + O(5^2)
sage: a.add_bigoh(-1)
5^-3 + O(5^-1)
is_equal_to(_right, absprec=None)#

Return whether self is equal to right modulo \(\pi^{\mbox{absprec}}\).

If absprec is None, returns True if self and right are equal to the minimum of their precisions.

INPUT:

  • right – a \(p\)-adic element

  • absprec – an integer, infinity, or None

EXAMPLES:

sage: R = Zp(5, 10); a = R(0); b = R(0, 3); c = R(75, 5)
sage: aa = a + 625; bb = b + 625; cc = c + 625
sage: a.is_equal_to(aa), a.is_equal_to(aa, 4), a.is_equal_to(aa, 5)
(False, True, False)
sage: a.is_equal_to(aa, 15)
Traceback (most recent call last):
...
PrecisionError: elements not known to enough precision

sage: a.is_equal_to(a, 50000)
True

sage: a.is_equal_to(b), a.is_equal_to(b, 2)
(True, True)
sage: a.is_equal_to(b, 5)
Traceback (most recent call last):
...
PrecisionError: elements not known to enough precision

sage: b.is_equal_to(b, 5)
Traceback (most recent call last):
...
PrecisionError: elements not known to enough precision

sage: b.is_equal_to(bb, 3)
True
sage: b.is_equal_to(bb, 4)
Traceback (most recent call last):
...
PrecisionError: elements not known to enough precision

sage: c.is_equal_to(b, 2), c.is_equal_to(b, 3)
(True, False)
sage: c.is_equal_to(b, 4)
Traceback (most recent call last):
...
PrecisionError: elements not known to enough precision

sage: c.is_equal_to(cc, 2), c.is_equal_to(cc, 4), c.is_equal_to(cc, 5)
(True, True, False)
is_zero(absprec=None)#

Determine whether this element is zero modulo \(\pi^{\mbox{absprec}}\).

If absprec is None, returns True if this element is indistinguishable from zero.

INPUT:

  • absprec – an integer, infinity, or None

EXAMPLES:

sage: R = Zp(5); a = R(0); b = R(0,5); c = R(75)
sage: a.is_zero(), a.is_zero(6)
(True, True)
sage: b.is_zero(), b.is_zero(5)
(True, True)
sage: c.is_zero(), c.is_zero(2), c.is_zero(3)
(False, True, False)
sage: b.is_zero(6)
Traceback (most recent call last):
...
PrecisionError: not enough precision to determine if element is zero
polynomial(var='x')#

Return a polynomial over the base ring that yields this element when evaluated at the generator of the parent.

INPUT:

  • var – string, the variable name for the polynomial

EXAMPLES:

sage: # needs sage.libs.ntl
sage: K.<a> = Qq(5^3)
sage: a.polynomial()
(1 + O(5^20))*x + O(5^20)
sage: a.polynomial(var='y')
(1 + O(5^20))*y + O(5^20)
sage: (5*a^2 + K(25, 4)).polynomial()
(5 + O(5^4))*x^2 + O(5^4)*x + 5^2 + O(5^4)
precision_absolute()#

Returns the absolute precision of this element.

This is the power of the maximal ideal modulo which this element is defined.

EXAMPLES:

sage: R = Zp(7,3,'capped-rel'); a = R(7); a.precision_absolute()
4
sage: R = Qp(7,3); a = R(7); a.precision_absolute()
4
sage: R(7^-3).precision_absolute()
0

sage: R(0).precision_absolute()
+Infinity
sage: R(0,7).precision_absolute()
7
precision_relative()#

Return the relative precision of this element.

This is the power of the maximal ideal modulo which the unit part of self is defined.

EXAMPLES:

sage: R = Zp(7,3,'capped-rel'); a = R(7); a.precision_relative()
3
sage: R = Qp(7,3); a = R(7); a.precision_relative()
3
sage: a = R(7^-2, -1); a.precision_relative()
1
sage: a
7^-2 + O(7^-1)

sage: R(0).precision_relative()
0
sage: R(0,7).precision_relative()
0
unit_part()#

Return \(u\), where this element is \(\pi^v u\).

EXAMPLES:

sage: R = Zp(17,4,'capped-rel')
sage: a = R(18*17)
sage: a.unit_part()
1 + 17 + O(17^4)
sage: type(a)
<class 'sage.rings.padics.padic_capped_relative_element.pAdicCappedRelativeElement'>
sage: R = Qp(17,4,'capped-rel')
sage: a = R(18*17)
sage: a.unit_part()
1 + 17 + O(17^4)
sage: type(a)
<class 'sage.rings.padics.padic_capped_relative_element.pAdicCappedRelativeElement'>
sage: a = R(2*17^2); a
2*17^2 + O(17^6)
sage: a.unit_part()
2 + O(17^4)
sage: b=1/a; b
9*17^-2 + 8*17^-1 + 8 + 8*17 + O(17^2)
sage: b.unit_part()
9 + 8*17 + 8*17^2 + 8*17^3 + O(17^4)
sage: Zp(5)(75).unit_part()
3 + O(5^20)

sage: R(0).unit_part()
Traceback (most recent call last):
...
ValueError: unit part of 0 not defined
sage: R(0,7).unit_part()
O(17^0)
val_unit(p=None)#

Return a pair (self.valuation(), self.unit_part()).

INPUT:

  • p – a prime (default: None). If specified, will make sure that p == self.parent().prime()

Note

The optional argument p is used for consistency with the valuation methods on integers and rationals.

EXAMPLES:

sage: R = Zp(5); a = R(75, 20); a
3*5^2 + O(5^20)
sage: a.val_unit()
(2, 3 + O(5^18))
sage: R(0).val_unit()
Traceback (most recent call last):
...
ValueError: unit part of 0 not defined
sage: R(0, 10).val_unit()
(10, O(5^0))
class sage.rings.padics.padic_capped_relative_element.ExpansionIter#

Bases: object

An iterator over a \(p\)-adic expansion.

This class should not be instantiated directly, but instead using expansion().

INPUT:

  • elt – the \(p\)-adic element

  • prec – the number of terms to be emitted

  • mode – either simple_mode, smallest_mode or teichmuller_mode

EXAMPLES:

sage: E = Zp(5,4)(373).expansion()
sage: I = iter(E)  # indirect doctest
sage: type(I)
<class 'sage.rings.padics.padic_capped_relative_element.ExpansionIter'>
class sage.rings.padics.padic_capped_relative_element.ExpansionIterable#

Bases: object

An iterable storing a \(p\)-adic expansion of an element.

This class should not be instantiated directly, but instead using expansion().

INPUT:

  • elt – the \(p\)-adic element

  • prec – the number of terms to be emitted

  • val_shift – how many zeros to add at the beginning of the expansion, or the number of initial terms to truncate (if negative)

  • mode – one of the following:

    • 'simple_mode'

    • 'smallest_mode'

    • 'teichmuller_mode'

EXAMPLES:

sage: E = Zp(5,4)(373).expansion()  # indirect doctest
sage: type(E)
<class 'sage.rings.padics.padic_capped_relative_element.ExpansionIterable'>
class sage.rings.padics.padic_capped_relative_element.PowComputer_#

Bases: PowComputer_base

A PowComputer for a capped-relative padic ring or field.

sage.rings.padics.padic_capped_relative_element.base_p_list(n, pos, prime_pow)#

Return a base-\(p\) list of digits of n.

INPUT:

  • n – a positive Integer

  • pos – a boolean; if True, then returns the standard base \(p\) expansion, otherwise the digits lie in the range \(-p/2\) to \(p/2\).

  • prime_pow – a PowComputer giving the prime

EXAMPLES:

sage: from sage.rings.padics.padic_capped_relative_element import base_p_list
sage: base_p_list(192837, True, Zp(5).prime_pow)
[2, 2, 3, 2, 3, 1, 2, 2]
sage: 2 + 2*5 + 3*5^2 + 2*5^3 + 3*5^4 + 5^5 + 2*5^6 + 2*5^7
192837
sage: base_p_list(192837, False, Zp(5).prime_pow)
[2, 2, -2, -2, -1, 2, 2, 2]
sage: 2 + 2*5 - 2*5^2 - 2*5^3 - 5^4 + 2*5^5 + 2*5^6 + 2*5^7
192837
class sage.rings.padics.padic_capped_relative_element.pAdicCappedRelativeElement#

Bases: CRElement

Constructs new element with given parent and value.

INPUT:

  • x – value to coerce into a capped relative ring or field

  • absprec – maximum number of digits of absolute precision

  • relprec – maximum number of digits of relative precision

EXAMPLES:

sage: R = Zp(5, 10, 'capped-rel')

Construct from integers:

sage: R(3)
3 + O(5^10)
sage: R(75)
3*5^2 + O(5^12)
sage: R(0)
0
sage: R(-1)
4 + 4*5 + 4*5^2 + 4*5^3 + 4*5^4 + 4*5^5 + 4*5^6 + 4*5^7 + 4*5^8 + 4*5^9 + O(5^10)
sage: R(-5)
4*5 + 4*5^2 + 4*5^3 + 4*5^4 + 4*5^5 + 4*5^6 + 4*5^7 + 4*5^8 + 4*5^9 + 4*5^10 + O(5^11)
sage: R(-7*25)
3*5^2 + 3*5^3 + 4*5^4 + 4*5^5 + 4*5^6 + 4*5^7 + 4*5^8 + 4*5^9 + 4*5^10 + 4*5^11 + O(5^12)

Construct from rationals:

sage: R(1/2)
3 + 2*5 + 2*5^2 + 2*5^3 + 2*5^4 + 2*5^5 + 2*5^6 + 2*5^7 + 2*5^8 + 2*5^9 + O(5^10)
sage: R(-7875/874)
3*5^3 + 2*5^4 + 2*5^5 + 5^6 + 3*5^7 + 2*5^8 + 3*5^10 + 3*5^11 + 3*5^12 + O(5^13)
sage: R(15/425)
Traceback (most recent call last):
...
ValueError: p divides the denominator

Construct from IntegerMod:

sage: R(Integers(125)(3))
3 + O(5^3)
sage: R(Integers(5)(3))
3 + O(5)
sage: R(Integers(5^30)(3))
3 + O(5^10)
sage: R(Integers(5^30)(1+5^23))
1 + O(5^10)
sage: R(Integers(49)(3))
Traceback (most recent call last):
...
TypeError: p does not divide modulus 49
sage: R(Integers(48)(3))
Traceback (most recent call last):
...
TypeError: p does not divide modulus 48

Some other conversions:

sage: R(R(5))
5 + O(5^11)

Construct from Pari objects:

sage: R = Zp(5)
sage: x = pari(123123) ; R(x)                                                   # needs sage.libs.pari
3 + 4*5 + 4*5^2 + 4*5^3 + 5^4 + 4*5^5 + 2*5^6 + 5^7 + O(5^20)
sage: R(pari(R(5252)))
2 + 2*5^3 + 3*5^4 + 5^5 + O(5^20)
sage: R = Zp(5,prec=5)
sage: R(pari(-1))
4 + 4*5 + 4*5^2 + 4*5^3 + 4*5^4 + O(5^5)
sage: pari(R(-1))                                                               # needs sage.libs.pari
4 + 4*5 + 4*5^2 + 4*5^3 + 4*5^4 + O(5^5)
sage: pari(R(0))                                                                # needs sage.libs.pari
0
sage: R(pari(R(0,5)))
O(5^5)

Todo

doctests for converting from other types of p-adic rings

lift()#

Return an integer or rational congruent to self modulo self’s precision. If a rational is returned, its denominator will equal p^ordp(self).

EXAMPLES:

sage: R = Zp(7,4,'capped-rel'); a = R(8); a.lift()
8
sage: R = Qp(7,4); a = R(8); a.lift()
8
sage: R = Qp(7,4); a = R(8/7); a.lift()
8/7
residue(absprec=1, field=None, check_prec=True)#

Reduce this element modulo \(p^{\mathrm{absprec}}\).

INPUT:

  • absprec – a non-negative integer (default: 1)

  • field – boolean (default None); whether to return an element of \(\GF{p}\) or \(\ZZ / p\ZZ\)

  • check_prec – boolean (default True); whether to raise an error if this element has insufficient precision to determine the reduction

OUTPUT:

This element reduced modulo \(p^\mathrm{absprec}\) as an element of \(\ZZ/p^\mathrm{absprec}\ZZ\).

EXAMPLES:

sage: R = Zp(7,4)
sage: a = R(8)
sage: a.residue(1)
1

This is different from applying % p^n which returns an element in the same ring:

sage: b = a.residue(2); b
8
sage: b.parent()
Ring of integers modulo 49
sage: c = a % 7^2; c
1 + 7 + O(7^4)
sage: c.parent()
7-adic Ring with capped relative precision 4

For elements in a field, application of % p^n always returns zero, the remainder of the division by p^n:

sage: K = Qp(7,4)
sage: a = K(8)
sage: a.residue(2)
8
sage: a % 7^2
1 + 7 + O(7^4)

sage: b = K(1/7)
sage: b.residue()
Traceback (most recent call last):
...
ValueError: element must have non-negative valuation in order to compute residue

See also

_mod_()

class sage.rings.padics.padic_capped_relative_element.pAdicCoercion_CR_frac_field#

Bases: RingHomomorphism

The canonical inclusion of \(\ZZ_q\) into its fraction field.

EXAMPLES:

sage: # needs sage.libs.flint
sage: R.<a> = ZqCR(27, implementation='FLINT')
sage: K = R.fraction_field()
sage: f = K.coerce_map_from(R); f
Ring morphism:
  From: 3-adic Unramified Extension Ring in a defined by x^3 + 2*x + 1
  To:   3-adic Unramified Extension Field in a defined by x^3 + 2*x + 1
is_injective()#

Return whether this map is injective.

EXAMPLES:

sage: # needs sage.libs.flint
sage: R.<a> = ZqCR(9, implementation='FLINT')
sage: K = R.fraction_field()
sage: f = K.coerce_map_from(R)
sage: f.is_injective()
True
is_surjective()#

Return whether this map is surjective.

EXAMPLES:

sage: # needs sage.libs.flint
sage: R.<a> = ZqCR(9, implementation='FLINT')
sage: K = R.fraction_field()
sage: f = K.coerce_map_from(R)
sage: f.is_surjective()
False
section()#

Return a map back to the ring that converts elements of non-negative valuation.

EXAMPLES:

sage: # needs sage.libs.flint
sage: R.<a> = ZqCR(27, implementation='FLINT')
sage: K = R.fraction_field()
sage: f = K.coerce_map_from(R)
sage: f(K.gen())
a + O(3^20)
sage: f.section()
Generic morphism:
  From: 3-adic Unramified Extension Field in a defined by x^3 + 2*x + 1
  To:   3-adic Unramified Extension Ring in a defined by x^3 + 2*x + 1
class sage.rings.padics.padic_capped_relative_element.pAdicCoercion_QQ_CR#

Bases: RingHomomorphism

The canonical inclusion from the rationals to a capped relative field.

EXAMPLES:

sage: f = Qp(5).coerce_map_from(QQ); f
Ring morphism:
  From: Rational Field
  To:   5-adic Field with capped relative precision 20
section()#

Returns a map back to the rationals that approximates an element by a rational number.

EXAMPLES:

sage: f = Qp(5).coerce_map_from(QQ).section()
sage: f(Qp(5)(1/4))
1/4
sage: f(Qp(5)(1/5))
1/5
class sage.rings.padics.padic_capped_relative_element.pAdicCoercion_ZZ_CR#

Bases: RingHomomorphism

The canonical inclusion from the integer ring to a capped relative ring.

EXAMPLES:

sage: f = Zp(5).coerce_map_from(ZZ); f
Ring morphism:
  From: Integer Ring
  To:   5-adic Ring with capped relative precision 20
section()#

Returns a map back to the ring of integers that approximates an element by an integer.

EXAMPLES:

sage: f = Zp(5).coerce_map_from(ZZ).section()
sage: f(Zp(5)(-1)) - 5^20
-1
class sage.rings.padics.padic_capped_relative_element.pAdicConvert_CR_QQ#

Bases: RingMap

The map from the capped relative ring back to the rationals that returns a rational approximation of its input.

EXAMPLES:

sage: f = Qp(5).coerce_map_from(QQ).section(); f
Set-theoretic ring morphism:
  From: 5-adic Field with capped relative precision 20
  To:   Rational Field
class sage.rings.padics.padic_capped_relative_element.pAdicConvert_CR_ZZ#

Bases: RingMap

The map from a capped relative ring back to the ring of integers that returns the smallest non-negative integer approximation to its input which is accurate up to the precision.

Raises a ValueError, if the input is not in the closure of the image of the integers.

EXAMPLES:

sage: f = Zp(5).coerce_map_from(ZZ).section(); f
Set-theoretic ring morphism:
  From: 5-adic Ring with capped relative precision 20
  To:   Integer Ring
class sage.rings.padics.padic_capped_relative_element.pAdicConvert_CR_frac_field#

Bases: Morphism

The section of the inclusion from \(\ZZ_q\) to its fraction field.

EXAMPLES:

sage: # needs sage.libs.flint
sage: R.<a> = ZqCR(27, implementation='FLINT')
sage: K = R.fraction_field()
sage: f = R.convert_map_from(K); f
Generic morphism:
  From: 3-adic Unramified Extension Field in a defined by x^3 + 2*x + 1
  To:   3-adic Unramified Extension Ring in a defined by x^3 + 2*x + 1
class sage.rings.padics.padic_capped_relative_element.pAdicConvert_QQ_CR#

Bases: Morphism

The inclusion map from the rationals to a capped relative ring that is defined on all elements with non-negative \(p\)-adic valuation.

EXAMPLES:

sage: f = Zp(5).convert_map_from(QQ); f
Generic morphism:
  From: Rational Field
  To:   5-adic Ring with capped relative precision 20
section()#

Return the map back to the rationals that returns the smallest non-negative integer approximation to its input which is accurate up to the precision.

EXAMPLES:

sage: f = Zp(5,4).convert_map_from(QQ).section()
sage: f(Zp(5,4)(-1))
-1
class sage.rings.padics.padic_capped_relative_element.pAdicTemplateElement#

Bases: pAdicGenericElement

A class for common functionality among the \(p\)-adic template classes.

INPUT:

  • parent – a local ring or field

  • x – data defining this element. Various types are supported, including ints, Integers, Rationals, PARI p-adics, integers mod \(p^k\) and other Sage p-adics.

  • absprec – a cap on the absolute precision of this element

  • relprec – a cap on the relative precision of this element

EXAMPLES:

sage: Zp(17)(17^3, 8, 4)
17^3 + O(17^7)
expansion(n=None, lift_mode='simple', start_val=None)#

Return the coefficients in a \(\pi\)-adic expansion. If this is a field element, start at \(\pi^{\mbox{valuation}}\), if a ring element at \(\pi^0\).

For each lift mode, this function returns a list of \(a_i\) so that this element can be expressed as

\[\pi^v \cdot \sum_{i=0}^\infty a_i \pi^i,\]

where \(v\) is the valuation of this element when the parent is a field, and \(v = 0\) otherwise.

Different lift modes affect the choice of \(a_i\). When lift_mode is 'simple', the resulting \(a_i\) will be non-negative: if the residue field is \(\GF{p}\) then they will be integers with \(0 \le a_i < p\); otherwise they will be a list of integers in the same range giving the coefficients of a polynomial in the indeterminant representing the maximal unramified subextension.

Choosing lift_mode as 'smallest' is similar to 'simple', but uses a balanced representation \(-p/2 < a_i \le p/2\).

Finally, setting lift_mode = 'teichmuller' will yield Teichmuller representatives for the \(a_i\): \(a_i^q = a_i\). In this case the \(a_i\) will lie in the ring of integers of the maximal unramified subextension of the parent of this element.

INPUT:

  • n – integer (default None). If given, returns the corresponding entry in the expansion. Can also accept a slice (see slice())

  • lift_mode'simple', 'smallest' or 'teichmuller' (default: 'simple')

  • start_val – start at this valuation rather than the default (\(0\) or the valuation of this element).

OUTPUT:

  • If n is None, an iterable giving a \(\pi\)-adic expansion of this element. For base elements the contents will be integers if lift_mode is 'simple' or 'smallest', and elements of self.parent() if lift_mode is 'teichmuller'.

  • If n is an integer, the coefficient of \(\pi^n\) in the \(\pi\)-adic expansion of this element.

Note

Use slice operators to get a particular range.

EXAMPLES:

sage: R = Zp(7,6); a = R(12837162817); a
3 + 4*7 + 4*7^2 + 4*7^4 + O(7^6)
sage: E = a.expansion(); E
7-adic expansion of 3 + 4*7 + 4*7^2 + 4*7^4 + O(7^6)
sage: list(E)
[3, 4, 4, 0, 4, 0]
sage: sum([c * 7^i for i, c in enumerate(E)]) == a
True
sage: E = a.expansion(lift_mode='smallest'); E
7-adic expansion of 3 + 4*7 + 4*7^2 + 4*7^4 + O(7^6) (balanced)
sage: list(E)
[3, -3, -2, 1, -3, 1]
sage: sum([c * 7^i for i, c in enumerate(E)]) == a
True
sage: E = a.expansion(lift_mode='teichmuller'); E
7-adic expansion of 3 + 4*7 + 4*7^2 + 4*7^4 + O(7^6) (teichmuller)
sage: list(E)
[3 + 4*7 + 6*7^2 + 3*7^3 + 2*7^5 + O(7^6),
0,
5 + 2*7 + 3*7^3 + O(7^4),
1 + O(7^3),
3 + 4*7 + O(7^2),
5 + O(7)]
sage: sum(c * 7^i for i, c in enumerate(E))
3 + 4*7 + 4*7^2 + 4*7^4 + O(7^6)

If the element has positive valuation then the list will start with some zeros:

sage: a = R(7^3 * 17)
sage: E = a.expansion(); E
7-adic expansion of 3*7^3 + 2*7^4 + O(7^9)
sage: list(E)
[0, 0, 0, 3, 2, 0, 0, 0, 0]

The expansion of 0 is truncated:

sage: E = R(0, 7).expansion(); E
7-adic expansion of O(7^7)
sage: len(E)
0
sage: list(E)
[]

In fields, on the other hand, the expansion starts at the valuation:

sage: R = Qp(7,4); a = R(6*7+7**2); E = a.expansion(); E
7-adic expansion of 6*7 + 7^2 + O(7^5)
sage: list(E)
[6, 1, 0, 0]
sage: list(a.expansion(lift_mode='smallest'))
[-1, 2, 0, 0]
sage: list(a.expansion(lift_mode='teichmuller'))
[6 + 6*7 + 6*7^2 + 6*7^3 + O(7^4),
2 + 4*7 + 6*7^2 + O(7^3),
3 + 4*7 + O(7^2),
3 + O(7)]

You can ask for a specific entry in the expansion:

sage: a.expansion(1)
6
sage: a.expansion(1, lift_mode='smallest')
-1
sage: a.expansion(2, lift_mode='teichmuller')
2 + 4*7 + 6*7^2 + O(7^3)
lift_to_precision(absprec=None)#

Return another element of the same parent with absolute precision at least absprec, congruent to this \(p\)-adic element modulo the precision of this element.

INPUT:

  • absprec – an integer or None (default: None); the absolute precision of the result. If None, lifts to the maximum precision allowed

Note

If setting absprec that high would violate the precision cap, raises a precision error. Note that the new digits will not necessarily be zero.

EXAMPLES:

sage: R = ZpCA(17)
sage: R(-1,2).lift_to_precision(10)
16 + 16*17 + O(17^10)
sage: R(1,15).lift_to_precision(10)
1 + O(17^15)
sage: R(1,15).lift_to_precision(30)
Traceback (most recent call last):
...
PrecisionError: precision higher than allowed by the precision cap
sage: R(-1,2).lift_to_precision().precision_absolute() == R.precision_cap()
True

sage: R = Zp(5); c = R(17,3); c.lift_to_precision(8)
2 + 3*5 + O(5^8)
sage: c.lift_to_precision().precision_relative() == R.precision_cap()
True

Fixed modulus elements don’t raise errors:

sage: R = ZpFM(5); a = R(5); a.lift_to_precision(7)
5
sage: a.lift_to_precision(10000)
5
residue(absprec=1, field=None, check_prec=True)#

Reduce this element modulo \(p^\mathrm{absprec}\).

INPUT:

  • absprec0 or 1.

  • field – boolean (default None). For precision 1, whether to return an element of the residue field or a residue ring. Currently unused.

  • check_prec – boolean (default True). Whether to raise an error if this element has insufficient precision to determine the reduction. Errors are never raised for fixed-mod or floating-point types.

OUTPUT:

This element reduced modulo \(p^\mathrm{absprec}\) as an element of the residue field or the null ring.

EXAMPLES:

sage: # needs sage.libs.ntl
sage: R.<a> = Zq(27, 4)
sage: (3 + 3*a).residue()
0
sage: (a + 1).residue()
a0 + 1
teichmuller_expansion(n=None)#

Returns an iterator over coefficients \(a_0, a_1, \dots, a_n\) such that

  • \(a_i^q = a_i\), where \(q\) is the cardinality of the residue field,

  • this element can be expressed as

\[\pi^v \cdot \sum_{i=0}^\infty a_i \pi^i\]

where \(v\) is the valuation of this element when the parent is a field, and \(v = 0\) otherwise.

  • if \(a_i \ne 0\), the precision of \(a_i\) is \(i\) less than the precision of this element (relative in the case that the parent is a field, absolute otherwise)

Note

The coefficients will lie in the ring of integers of the maximal unramified subextension.

INPUT:

  • n – integer (default None). If given, returns the coefficient of \(\pi^n\) in the expansion.

EXAMPLES:

For fields, the expansion starts at the valuation:

sage: R = Qp(5,5); list(R(70).teichmuller_expansion())
[4 + 4*5 + 4*5^2 + 4*5^3 + 4*5^4 + O(5^5),
3 + 3*5 + 2*5^2 + 3*5^3 + O(5^4),
2 + 5 + 2*5^2 + O(5^3),
1 + O(5^2),
4 + O(5)]

But if you specify n, you get the coefficient of \(\pi^n\):

sage: R(70).teichmuller_expansion(2)
3 + 3*5 + 2*5^2 + 3*5^3 + O(5^4)
unit_part()#

Returns the unit part of this element.

This is the \(p\)-adic element \(u\) in the same ring so that this element is \(\pi^v u\), where \(\pi\) is a uniformizer and \(v\) is the valuation of this element.

EXAMPLES:

sage: # needs sage.libs.ntl
sage: R.<a> = Zq(125)
sage: (5*a).unit_part()
a + O(5^20)
sage.rings.padics.padic_capped_relative_element.unpickle_cre_v2(cls, parent, unit, ordp, relprec)#

Unpickles a capped relative element.

EXAMPLES:

sage: from sage.rings.padics.padic_capped_relative_element import unpickle_cre_v2
sage: R = Zp(5); a = R(85,6)
sage: b = unpickle_cre_v2(a.__class__, R, 17, 1, 5)
sage: a == b
True
sage: a.precision_relative() == b.precision_relative()
True
sage.rings.padics.padic_capped_relative_element.unpickle_pcre_v1(R, unit, ordp, relprec)#

Unpickles a capped relative element.

EXAMPLES:

sage: from sage.rings.padics.padic_capped_relative_element import unpickle_pcre_v1
sage: R = Zp(5)
sage: a = unpickle_pcre_v1(R, 17, 2, 5); a
2*5^2 + 3*5^3 + O(5^7)